REXROTH机械式调压阀应用，安沃驰调压阀参数

REXROTH机械式调压阀应用，安沃驰调压阀参数
外壳  压铸锌
正面板  丙烯腈合成材料
密封  丙烯树胶
介质温度范围 -10°C / +60°C
Ambient temperature range -10 ° C / + 60 ° C
Regulator Type Diaphragm type regulator can be assembled into blocks
Adjust the function with secondary exhaust
安装位置 任意
工作压力范围 0,5 bar / 16 bar
介质 压缩空气
中性气体
the ambient and medium temperature and the maximum permissible temperature is 3 ° C.
Close the pressure gauge connector on the rear of the
regulator with a sealing plug and open the front.

REXROTH机械式调压阀应用，安沃驰调压阀参数

Can be equipped with separate sealing plug according to
customer application. Please order separay (see attachment).
Applicable to use in the 1,2,21,22 Ex area
Recommended primary filter: 5 μm
环境温度范围 -10°C / +60°C
调节器型号 隔膜式调压阀, 可以组装成块
调整功能 带二次排气
调节范围 zui小/zui大 见下表
压力输送 单的
二次压力为 p2 = 6 bar 、Δp = 1 bar 时的额定流量 Qn
Adjustment range min / max See table below
Pressure delivery single
Shell die-cast zinc
Positive Panel Acrylonitrile Synthetic Material
Sealed acrylic gum
The pressure dew point must be at least 15 ° C below